How to Program a GEMINI Gate Motor

How To Set Limits On Gemini Gate Motor

• Identify the Limit Switches: These are usually located on the motor and are used to control the gate’s range of motion. They prevent the gate from opening or closing too far.
• Adjust the Open Limit: Move the gate to the desired open position. Adjust the open limit switch to this position. This will be the point at which the gate stops when it is fully open.
• Adjust the Close Limit: Close the gate to the desired closed position. Adjust the close limit switch to this position. This will be the point at which the gate stops when it is fully closed.
• Test the Limits: After adjusting the limit switches, test the gate to ensure it opens and closes at the correct positions. Make any necessary adjustments.

Video on how to Set Gate Limits for Gemini Gate Motor

Still, Struggling with your gate motor after following these instructions? Contact Pro Gate Motor today and get help today from a trusted partner in your area!

Reversing the Electrical Motor Direction

• Identify the Gate Direction Dipswitch: This is located on the electronic control card.
• Set the Direction: The electrical motor direction default is set by positioning the gate direction dipswitch on the electronic control card either to the left or right.
• Test the Direction: Press the remote-control button. The gate must move to the closed position at slow speed and stop. If the gate moves to the open position on the first activation, the electrical motor direction is incorrectly set and must be reversed.

Please note that these are specific steps for the GEMINI 24V DC Complex Gate Motor. If these steps do not resolve your issue, it’s recommended to contact a professional or the manufacturer for further assistance.

Still, Struggling with your gate motor after following these instructions? Contact Pro Gate Motor today and get help today from a trusted partner in your area!

Programming a GEMINI Code Hopping Remote Control (Page 13)

• Important: The transmitters and receiver supplied with this motor have already been programmed. Only additional transmitters and receivers need to be programmed.
• Once the electrical supply is correctly connected, the additional transmitters can be programmed.
• If a non-GEMINI remote control is used, program the control as per the supplier’s instructions.

To learn the transmitters (Maximum of 30):

• Press and hold the transmitter (remote) button.
• Press and release the learn button on the PCB.
• The receiver LED on the PCB will flash twice.
• Release the transmitter button after the LED has flashed twice.
• Repeat steps 1-4 for additional transmitters.

Still, Struggling with your gate motor after following these instructions? Contact Pro Gate Motor today and get help today from a trusted partner in your area!

To erase all transmitters(To erase all Remote Controls in Memory):

• Press and hold the LEARN button for 10 seconds or until the receiver LED turns off.

Please note that if you encounter any problems during the programming of the remotes, the document also includes a troubleshooting guide.

Remember, incorrect programming can lead to malfunctioning of the gate motor, so please follow these instructions carefully. If you need further assistance, don’t hesitate to ask.

Gemini Gate Motor Programming Tips Video 

Still, Struggling with your gate motor after following these instructions? Contact Pro Gate Motor today and get help today from a trusted partner in your area!

GEMINI Gate Motor Manuals with Programming Instructions

Below you will find GEMINI Installation Manuals with the Gate Motor Programming Instructions:

• Gemini 24v Complex Gate Motor Installation Manual with Programming Instructions.
• Gemini 12v Slider Gate Motor Installation Manual with Programming Instructions.

Related Gemini Gate Motor Technical Info and Support Pages: