Guide To Programming Centurion Gate Motor Remotes

Programming a Remote for the Centurion D5-Evo and D10, D10turbo Sliding Gate Motor

“The controller is capable of learning up to 500 CENTURION NOVA rolling code remote control buttons (Keeloq encryption). Each transmitter can have up to four buttons.

One of the buttons is used as a ‘shift button’ to allow the other buttons to be used again in combination with this button. In other words, the user will press and hold the shift button, before pressing one of the other buttons to create a new button. The shift button cannot be used as a button on its own, it must always be used in combination with the other buttons.

• Each transmitter learned into the system is assigned a unique transmitter ID. If the remote controls menu has been locked as discussed later, only by pressing a button of a transmitter learned into the system, can the remote controls menu be accessed.
• ‘Add remote’: Any button can be set to control the trigger, pedestrian, free-exit, Holiday Lockout or courtesy light control (Aux) inputs. When adding transmitters, it is recommended that a record be kept of the ID number allocated by the system to each respective transmitter and the person to whom the transmitter is given. This is necessary should selective deletion be required at a later stage.

Delete remote’: Transmitters can be deleted at any stage according to one of the following methods:

• ‘Delete remote by ID’: Each transmitter can be deleted individually according to its unique ID. To facilitate this, a record of the ID and the person to whom the ID has been assigned must have been made at the time of learning the transmitter into the system. The transmitter is not required for this operation.
• ‘Delete remote button’: The operation of a button of a particular transmitter can be cleared. For example, it allows the Holiday Lockout function set on one remote button of a transmitter to be cleared, without affecting the other operations that the same transmitter performs. The transmitter is required for this operation.
• ‘Delete remote by button’: Use this procedure to remove the transmitter from the system. All button functionality will be removed. The transmitter is required for this operation.

‘Edit remote button’: Change the function of one button to perform another function. For example, button one’s function is to open the gate completely. To change this, use the edit remote button, select Ped, and button one of the same remote will now only open the gate to pedestrians.

‘Autolearn’: Allows a selectable time period to be set, during which any specific button, when pressed, will be learned to a specific function. The function itself will also be activated when the button is pressed. After the time period has expired auto-learn is disabled, and no further buttons will be learned. The time period can be set from one hour to seven days in one-hour increments.”

Please note that these are the exact words from the manual and may contain some technical terms. Always refer to the specific manual for your model for the most accurate information.

Centurion D5 and D10 Gate Motor Installation Manual with Instruction on How to Program Gate Remotes

• Centurion D5 Evo Installation Manual Pdf
• Centurion D10 Installation Manual Pdf

Still, Struggling with your gate motor installation after following these instructions? Contact Pro Gate Motor today and get help today from a trusted partner in your area!

How to Program a Remote Centurion D3 Gate Motor and Centurion D5 Motors 

Programming a remote for Centurion D3 and Centurion D5 Gate Motors is fairly simple. It is done via the master remote (the first remote that was set up upon installation) The video below will explain the process in detail.

Still, Struggling with your gate motor installation after following these instructions? Contact Pro Gate Motor today and get help today from a trusted partner in your area!

Programming a Remote Centurion D10, Centurion D20 Smart Gate Motor 

All Programing of remote are done via the MyCentsysPro app which is available for both Android and IOS 

Link to android app:

https://play.google.com/store/apps/details?id=com.centurionsystems.mycentsysremote

Link to IOS app:

https://apps.apple.com/za/app/mycentsys-remote/id1626441948

Still, Struggling with your gate motor installation after following these instructions? Contact Pro Gate Motor today and get help today from a trusted partner in your area!

Programming a Remote Centurion D5 Smart Gate Motor 

All Programing of remote are done via the MyCentsysPro app which is available for both Android and IOS. Please follow the instructions in the app to program your new remotes.

Link to Android app:

https://play.google.com/store/apps/details?id=com.centurionsystems.mycentsysremote

Link to IOS app:

https://apps.apple.com/za/app/mycentsys-remote/id1626441948

Video Explaining the Functionality of the Centurion D5 Smart Gate Motor

Still, Struggling with your gate motor installation after following these instructions? Contact Pro Gate Motor today and get help today from a trusted partner in your area!

Related Centurion Gate Motor Technical Info and Support Pages: